The beautiful first single, Never Come Back is out now

This is the second EP I have mixed for SääD, and was not without some interesting production challenges worthy of discussion in this production blog.

Firstly, the collaborative nature of this record, involved a lot of lo fi, iPhone recordings of Johnathan on keys or double bass. Whilst, full of atmosphere and vibe, the recordings were at times very resonant, by this I mean a lot of concentrated frequency content, often in the mids, such resonances causing distortion problems for smaller speakers at the start of the mixing process.

For example, the main piano / keys featured in this single were recorded via an iPhone at a distance from Jonathan’s keyboard / keyboard speaker. Due to the frequency response of the iPhone’s inbuilt microphone, and due to the proximity effect, the keys have a majority of frequency content concentrated between 500Hz and 2kH.

To solve such issues of resonance, my production tools relied heavily on multi-band compression, and frequency specific compression, such as Fab Filter Pro-Q3’s dynamic EQ, and Oaksound’s Soothe 2. This somewhat modern ability to compress certain frequencies enabled me to control certain frequencies that were causing distortion in smaller speaker types. See the images of such plugins below.

Further, to address the lack of frequencies in other areas of the spectrum, due to some of the lo fi recording techniques, saturation, was used to stimulate and inflate both the bass and high frequency content. Currently, my tools of choice in these areas of saturation are Waves’ Vitamin, for multi-band saturation, and Slate Digital’s Fresh Air for more high frequency simulation.

I’ve also made a quicktime screen grab of a technique that I often use to create space in a mix for a vocal. Check that video out below

It’s always a pleasure to work for the artist SääD, and I hope this short article inspires other producers out there.

The post Mixing SääD’s Never Come Back appeared first on chrishancock.network.